SkyWand: About & highlights, every question, answered
36 answers below, written from the manufacturer's manuals and our own bench experience. Prefer to tap through them? The same answers power the live chat in the corner. Ready to buy? See the SkyWand or request a quote.
What is the SkyWand?
The SkyWand is a cordless, handheld UV LED spot curing lamp made by Uvitron International. It's built for rework, field repair, and curing parts too large or awkward for a benchtop system.
It ships as a complete kit: lamp, charger, two Li-ion batteries, UV-protective goggles, and a plastic carry case.
What jobs is the SkyWand best suited for?
Rework, field service, and spot curing on parts you can't bring to a bench. Because it's cordless, you take full-intensity UV to the work instead of the other way around.
Uvitron designed it for UV glue curing applications across assembly and repair work.
Is the SkyWand truly cordless?
Yes. It runs on a rechargeable 3.7 V 3000 mAh Li-ion battery in the handle, and the kit includes two swappable packs so you can run one while the other charges.
Who makes the SkyWand?
It's manufactured by Uvitron International of West Springfield, MA. We're UV Spot Shop, the US-based supplier, we stock it, ship it, and support it.
What's the SkyWand part number?
The part number is UVS-SW1-LED. You specify the 365 nm or 405 nm version when you order.
How is it different from a benchtop spot curer?
A benchtop system stays at a fixed station; the SkyWand goes to the part. There's no cord and no light-guide run, you aim the lamp's lens directly at the joint.
If your work is a fixed station or automation, look at our benchtop systems instead, we're happy to advise on a quote.
Why LED instead of an arc lamp?
LEDs switch on and off instantly with no warm-up, hold a consistent UV output, and run cool. The focused spectral output also minimizes IR, so assemblies see less heating.
Will UV output fade as the battery drains?
No. The SkyWand maintains constant UV output, the UV power will not fade, even on a low battery, so every cure gets the same intensity.
Will it overheat my parts?
The SkyWand's focused spectral output minimizes IR and reduces heating of assemblies. That's one of the advantages of its LED source over broadband lamps.
What's included in the kit?
One UV LED lamp, one battery charger, two rechargeable Li-ion batteries, one pair of UV-protective goggles, and a plastic carry case.
Can I start curing right out of the box?
Almost, the Li-ion battery must be fully charged before first use, which takes about 4 hours. After that, insert the pack, put on the goggles, and you're curing.
Which wavelengths does the SkyWand come in?
We stock 365 nm and 405 nm versions. Uvitron's brochure also lists 385 nm and 395 nm builds, mention it on a quote request if your chemistry needs one of those.
Is it good for field repair work?
That's exactly what it's for. It's cordless, runs about 2 hours per pack with a spare included, and the whole kit travels in a protective carry case.
Can it cure oversized or awkward parts?
Yes, instead of fitting the part under a bench lamp, you bring the SkyWand to the part. That's its core advantage for large assemblies and hard-to-reach joints.
How portable is it really?
The wand is 146 mm x 25 mm and weighs 130 g with the battery, genuinely pocketable. The full kit with charger, spare pack, and goggles packs into one plastic carry case.
What does constant UV output mean?
The output is regulated, so intensity holds steady as the battery drains instead of tapering off. Every cure gets the same dose, first shot of the day or last.
Does it cure UV adhesives and glues?
Yes, it's designed for UV glue curing applications. Match the lamp wavelength (365 or 405 nm) to what your adhesive datasheet calls for.
Which industries typically use it?
Our customers run spot curing across electronics, medical, and optical assembly. The SkyWand's niche is rework, field service, and any cure a benchtop can't reach.
SkyWand vs SunSpot 2 - which one?
The SunSpot 2 is a 200 W arc benchtop system delivering over 18 W/cm² UVA, for fixed, high-intensity stations. The SkyWand trades raw intensity for cordless portability at 0.9 W/cm².
Many shops run one of each: benchtop for production, SkyWand for rework. We can help you compare on a quote.
SkyWand vs SkyBeam - what's different?
The SkyBeam is a 4-channel LED benchtop system built for automation; the SkyWand is a single-point handheld for mobile work. Pick SkyBeam for fixtured production, SkyWand for going to the part.
Is it simple enough for any technician?
Yes, one switch turns the UV on and off, and there's no warm-up or settings to manage. Charge, insert the pack, goggles on, cure.
Where can I download the brochure?
Right here, the SkyWand brochure covers the full spec list and product overview. It's also linked in the Downloads section of the product page.
Where's the operation manual?
Download it here, it covers charging, lamp operation, safety instructions, and maintenance.
Is it powerful for a handheld?
Uvitron describes it as a high-powered handheld UV LED spot curing lamp: 0.9 W/cm² focused into a 15 mm spot. That's real curing intensity in a 130 g wand.
Can one person run spot cures alone?
Yes, the SkyWand is a one-hand tool with a single switch, weighing just 130 g. One technician can steady the part with one hand and cure with the other.
Who is Uvitron International?
Uvitron International is the manufacturer, located at 150 Front St., Unit 4, West Springfield, MA. We're UV Spot Shop, their US-based supplier for spot curing systems and accessories.
What makes it good for rework?
Instant on/off with no warm-up, a tight 15 mm spot, and total freedom of position. You can tack or re-cure a joint on a finished assembly without moving it to a bench.
Could it replace our benchtop system?
For mobile and occasional spot cures, yes; for fixed high-throughput stations, a benchtop like the SunSpot 2 or SkyBeam is usually the better fit. Many customers pair a benchtop with a SkyWand for rework.
Does it use a light guide?
No, the SkyWand emits directly through its optical lens, so there's no light guide to route or maintain. Uvitron's brochure lists six optical lens models for shaping the output.
What's the exact model I'd be ordering?
The Uvitron SkyWand handheld UV LED curing lamp, P/N UVS-SW1-LED, configured for 365 nm or 405 nm.
Why does the kit include two batteries?
So downtime never stalls you: one pack runs the lamp while the other charges. Swap when needed and rotate all day.
Is it comfortable for long sessions?
At 130 g with battery and a 25 mm diameter body, it handles like a large pen. There's no cord drag either, which helps on long rework sessions.
Will it help with PCB rework and tacking?
Yes, spot curing UV adhesives for PCB and component tacking is a classic use, and the SkyWand brings that capability to boards already installed in assemblies. Match the wavelength to your adhesive first.
What documentation can I read first?
Two PDFs: the brochure (specs and product overview) and the operation manual (charging, use, and safety). We link them from the product page's Downloads section.
Can it reach tight or shadowed spots?
Being handheld, you can angle it into positions no bench lamp reaches, though UV still cures line-of-sight, so the light must see the adhesive. The 28 mm focus distance keeps the working gap small.
What are the SkyWand's limitations?
It trades raw power for portability: 0.9 W/cm² versus the much higher intensities of benchtop arc systems, roughly 2-hour runtime per pack, and manual timing with its single switch. For fixed, high-throughput stations a benchtop system is the better tool, we'll tell you straight on a quote.
