Buyer Guides
UV Curing Buyer Guides
Selection, application, and process guides written from the manufacturer's manuals and bench practice, no fluff, real numbers. Start with the comparisons if you're choosing a system; the application guides go deeper on each use case.
Arc Lamp vs LED UV Spot Curing: Which Source Is Right?
Broad-spectrum arc or narrowband LED? Compare spectrum, intensity, warm-up, lamp life, running cost, and heat at the part, and when each source wins.
Read the guide →
SunSpot 2 vs SkyBeam: Which Benchtop UV Curing System?
200 W broad-spectrum arc vs 4-channel LED: spectrum, intensity, automation I/O, consumables, box contents, and $4,220 vs $2,900 pricing, with buyer verdicts.
Read the guide →
Benchtop vs Handheld UV Curing: Which Setup Fits Your Work?
Fixtured benchtop repeatability or a cordless wand that goes to the part? Compare SkyWand, SkyBeam, and SunSpot 2, and why many shops end up running both.
Read the guide →
UV Spot Curing for PCB Component Tacking & Wire Staking
How to tack SMD components, stake wires, and terminate coils with UV spot curing: system and light-guide selection, second-scale workflow, and process tips.
Read the guide →
UV Adhesive Bonding, Potting & Encapsulation
Joint design, dam-and-fill encapsulation, depth of cure, and dual-cure strategies for UV adhesive bonding, plus how to choose the right spot-curing system.
Read the guide →
UV Curing for Medical Device Assembly
UV spot curing for catheters, needles, and tube sets: repeatable programmed dose, adhesive selection with your vendor, and in-house process validation.
Read the guide →
UV Curing for Optical & Photonics Assembly
Lens bonding, fiber termination, and align-then-tack workflows with UV spot curing, low-stress cure schedules, CTE and shrinkage control, system selection.
Read the guide →
UV Curing for Rework, Touch-Up & Field Repair
Spot UV curing for PCB rework, conformal coating touch-up, and field repair, bench vs handheld workflows, and why constant LED output matters on battery.
Read the guide →
How to Choose a UV Light Guide
Liquid-filled vs fused fiber, core diameter vs intensity, length losses, bend radius, and splitter balance, how to pick the right UV light guide.
Read the guide →
UV Curing Safety: Setting Up a Safe Workstation
Eye and skin hazards by UV band, shade-5.0 eyewear, shielding materials, interlocks, and hot-surface precautions for a safe spot-curing workstation.
Read the guide →
Developing a Repeatable UV Cure Process
Irradiance vs dose, process windows, fixturing, radiometer checks at the working plane, and revalidation after lamp or guide changes, a practical playbook.
Read the guide →
Know what you need?
Published pricing on all three systems, US stock, volume tiers by quote, response within 1 business day.
