Curing Loctite AA 349 With a UV Spot System
Loctite AA 349 is a light-cure acrylic. Its manufacturer's datasheet cures it at 365 nm, 100 mW/cm² at 365 nm for 20-30 s. Here is which Uvitron UV spot systems cover that wavelength, how to choose between them, and what to confirm before you run production.
Specifications from Henkel LOCTITE AA 349 Technical Data Sheet (read Jul 2026, datasheet rev September 2014). View the Manufacturer Datasheet ↗
Which Systems Cover It
Worth Knowing: Its datasheet also calls for 250 nm to fully cure surfaces exposed to air (to beat oxygen inhibition). That UVC line is below the 275 nm floor of these systems, so cure under a nitrogen blanket or expect a slightly tacky air-exposed surface.
All three systems output the 365 nm this adhesive needs, so choose by how you cure, not by wavelength:
Read This Before You Rely on It. These are the manufacturer's published specifications, not our own test results. Whether a cure fully succeeds also depends on your film thickness, joint geometry, substrate, and lamp distance, so always validate the cure on your own parts and process, and confirm the numbers against the manufacturer's current datasheet.
Loctite AA 349 and other product names are trademarks of their respective owners. UV Spot Shop is an independent equipment supplier and is not affiliated with, authorized by, or endorsed by Henkel.

