Curing DELO PHOTOBOND GB368 With a UV Spot System
DELO PHOTOBOND GB368 is a modified-acrylate UV adhesive. Its manufacturer's datasheet cures it at 320–420 nm. Here is which Uvitron UV spot systems cover that wavelength, how to choose between them, and what to confirm before you run production.
Specifications from DELO PHOTOBOND GB368 Technical Data Sheet (read Jul 2026, datasheet rev 2023). View the Manufacturer Datasheet ↗
Which Systems Cover It
All three systems output the 320–420 nm this adhesive needs, so choose by how you cure, not by wavelength:
Read This Before You Rely on It. These are the manufacturer's published specifications, not our own test results. Whether a cure fully succeeds also depends on your film thickness, joint geometry, substrate, and lamp distance, so always validate the cure on your own parts and process, and confirm the numbers against the manufacturer's current datasheet.
DELO PHOTOBOND GB368 and other product names are trademarks of their respective owners. UV Spot Shop is an independent equipment supplier and is not affiliated with, authorized by, or endorsed by DELO.

